GB/T 10069.1-2006 旋转电机噪声测定方法及限值 第1部分:旋转电机噪声测定方法

作者:标准资料网 时间:2024-05-10 16:25:08   浏览:9807   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:旋转电机噪声测定方法及限值 第1部分:旋转电机噪声测定方法
英文名称:Measurement of airborne noise emitted by rotating electrical machines and the noise limits Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
中标分类: 电工 >> 旋转电机 >> 旋转电机综合
ICS分类: 电气工程 >> 旋转电机 >> 旋转电机综合
替代情况:替代GB/T 10069.1-1988;GB/T 10069.2-1988
发布部门:中华人民共和国质量监督检验检疫总局、中国国家标准化管理委员会
发布日期:2006-04-30
实施日期:2006-12-01
首发日期:1988-12-10
作废日期:1900-01-01
主管部门:中国电器工业协会
提出单位:全国旋转电机标准化技术委员会(SAC/TC26)
归口单位:全国旋转电机标准化技术委员会(SAC/TC26)
起草单位:上海电器科学研究所、广州电器科学研究院、哈尔滨大电机研究所、煤科总院上海分院测试中心等
起草人:陈业绍、施庆圆、钟志刚、张建、罗雪平、穆景坤
出版社:中国标准出版社
出版日期:2006-12-01
页数:平装16开 页数:20, 字数:34千字
计划单号:20060178-T-604
适用范围

本标准,修改采用ISO1680:1999,是对GB 10069.1-198和GB 10069.2-1988的修订,自发布实施之日起代替以上两个标准。
本标准规定了在标准条件下设计测定、标示和检验旋转电机噪声发射特性所需的所有内容。同时还规定了适用的噪声测试方法和试验时的运行状态及安装方法。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 电工 旋转电机 旋转电机综合 电气工程 旋转电机 旋转电机综合
下载地址: 点击此处下载
Product Code:SAE AMS6280
Title:Steel Bars, Forgings, and Rings, 0.50cr 0.55ni 0.20mo (0.28-0.33c)
Issuing Committee:Ams E Carbon And Low Alloy Steels Committee
Scope:This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings. Primarily for parts with sections 0.500 inch (12.70 mm) and under in thickness at the time of heat treatment, requiring a through-hardening steel capable of developing hardness as high as 35 HRC when properly hardened and tempered and also parts of greater thickness but requiring proportionately lower hardness.